英语翻译1.Bracelet Design and Outlay.2. chargingThe Bluetooth bracelet comes with a built in rechargeable battery.Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge)2.1 How to chargeTo char

来源:学生作业帮助网 编辑:作业帮 时间:2024/04/28 13:42:13
英语翻译1.Bracelet Design and Outlay.2. chargingThe Bluetooth bracelet comes with a built in rechargeable battery.Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge)2.1 How to chargeTo char

英语翻译1.Bracelet Design and Outlay.2. chargingThe Bluetooth bracelet comes with a built in rechargeable battery.Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge)2.1 How to chargeTo char
英语翻译
1.Bracelet Design and Outlay.
2. charging
The Bluetooth bracelet comes with a built in rechargeable battery.Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge)
2.1 How to charge
To charge the bracelet please plug the appropriate end in to the bracelet charge port on the bracelet and the USB end either into a computer or the wall adapter provided.
2.2 Normal Charging Time
The bracelet will normally take 2 hours charge from completely flat.When the battery is fully charged the bracelet will automatically stop charging.
2.3 Charge Indication
The LED light will be solid red when battery is charging.Once the battery is fully charged the light will turn off .
2.4 Standby time
Up to 60 hours standby time,note that the stand by time is effected by how often the bracelet vibrates and flashes.
2.5 Low Battery Notification
When the battery is running low the LED will blink red and the bracelet will beep/vibrate once a minute.When this occurs please charge the bracelet to ensure greater battery life.
3.Turning the Bracelet OFF/ON
To turn the bracelet on old down the main btton for 2 seconds until the LED flashes.To turn the bracelet off hold the main button down until the LED turns off.
4.Prairing Bracelet with phone
To pair the bracelet with your phone:
Keep bracelet within 1 metre of your phone
Ensure bracelet is turned off to begin
Hold the main button down for 4 seconds until the LED light starts flashing green and red.
Search for the device on your phone,it will come up with the name “Bracelet”
Press yes to pair the device.
It will then ask for a pass code enter “0000”
Press yes to connect the device and authorise it .
The bracelet should now be paired with your phone.
5.Linking Bracelet with phone
When the bracelet is turned back on,depending on your phone it should re-link automatically.
To re-link the bracelet with the phone manually go to the Bluetooth menu on your phone select the bracelet in thin list and choose the connect with device option.Ensure that your bracelet is now turned on .You may have to re-enter the pass code.
6.Bracelet Operation
The bracelet will vibrate and the LED will flash blue when you have an incoming call.
7.To Reset Bracelet
You may want to reset the bracelet back to the original factory settings,this function clears all current pairings with bracelet:
Ensure that bracelet is switched of
Continually keep pressing the main button until LED flashes blue and red .
Release the main button
Hold main button until it buzzes 2 times.
Connect the power charge cable to the bracelet and charge for a few seconds.
The bracelet will now turn off and all parings have been cleared.
请懂英语的用人工翻译,译出来的还是难懂.

英语翻译1.Bracelet Design and Outlay.2. chargingThe Bluetooth bracelet comes with a built in rechargeable battery.Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge)2.1 How to chargeTo char
1.手链设计与使用.
2.充电
蓝牙手链内附有电池. 第一次使用前请将电充满(大约6小时)
2.1 怎样充电
将充电线中的一头连接上手链,另外USB的一头接上电脑或者自带的充电器.
2.2 正常充电时间
如果手链电完全用光,一般要2小时才能充满.电池满时将自动停止充电.
2.3 充电征兆
充电时LED灯会是红色的. 电充满时LED灯会转绿.
2.4 开机时间
能开60小时, 手镯震动和闪光次数越多时间越短
2.5 电不足时提示
当电池电不足是LED将会呈红色并闪烁,手链也会每一分钟 哔哔叫/震动 一旦当这种情况发生时请立刻充电以保持电池寿命
3. 手链开启与关闭
欲开手链,按下"main"按钮两秒,直到LED灯亮. 欲关手镯,按下"main"按钮,直到LED灯灭.
4. 建立手链与手机的联系
连接手链与手机步骤如下:
手链与手机保持1米距离内
开始先将手链关闭.
按住"main"按钮4秒直到LED灯闪红又闪绿
在手机上寻找设备,找到后按"yes"
手机会问密码,这时输入"0000"
再按"yes"确定.
连接成功!
5. 建立手链与手机的联系
将手链开启,此时手机应该会自动连接手链
手动连接:在手机中选中手链,选择连接此设备选项 在此前请确定手链已开启.可能需要重输密码.
6. 手链功能
当有人打你手机时,手链将会震动同时LED灯会闪蓝
7. 重置手链
你可以将手链设置成刚出工厂时的状态, 这样会刷去手链一切记忆:
首先将手链(这段看不懂)
然后连续按"main"按钮直到LED灯闪红+蓝.
现在停止按
接着按住"main"按钮不放,知道听见2声巴兹
将手链接上充电器.
系统重设成功.
这可是俺花了10分钟时间以俺初二水平辛辛苦苦翻译出来的,保证不是机器