在matlab中如何解决：The following two blocks cannot be connected in series:Block 1:'A:Synchronous Machine pu Standard'Block 2:'transfo_1_winding_1:Three-plp-Phase Transformer (Two Windings)'The first block,modeled as a current source,cannot be

来源：学生作业帮助网 编辑：作业帮 时间：2024/04/28 17:22:59
在matlab中如何解决：The following two blocks cannot be connected in series:Block 1:'A:Synchronous Machine pu Standard'Block 2:'transfo_1_winding_1:Three-plp-Phase Transformer (Two Windings)'The first block,modeled as a current source,cannot be

在matlab中如何解决：The following two blocks cannot be connected in series:Block 1:'A:Synchronous Machine pu Standard'Block 2:'transfo_1_winding_1:Three-plp-Phase Transformer (Two Windings)'The first block,modeled as a current source,cannot be
在matlab中如何解决：The following two blocks cannot be connected in series:
Block 1:'A:Synchronous Machine pu Standard'
Block 2:'transfo_1_winding_1:Three-plp-Phase Transformer (Two Windings)'
The first block,modeled as a current source,cannot be connected in series with the inductive element of the second block.
Add a high-value resistance in parallel with one of the two block.
You can also specify high-value resistive snubbers if the blocks have a snubber device.

在matlab中如何解决：The following two blocks cannot be connected in series:Block 1:'A:Synchronous Machine pu Standard'Block 2:'transfo_1_winding_1:Three-plp-Phase Transformer (Two Windings)'The first block,modeled as a current source,cannot be
就是这个图形吧,我一开始也碰到过这样的困惑,你需要把与G相连的变压器的L改成0即可,请看图片（红框）.

应该是连接的错误吧，电流源不能串联感性元件，去掉那个电感看看

matlab如何解决实际问题 在matlab中如何解决：The following two blocks cannot be connected in series:Block 1:'A:Synchronous Machine pu Standard'Block 2:'transfo_1_winding_1:Three-plp-Phase Transformer (Two Windings)'The first block,modeled as a current source,cannot be 在matlab中如何输入矩阵 在matlab 中如何画指数分布图 在matlab中如何表示对数? 指数形式在matlab中如何书写 下式在matlab中如何表示 在matlab中如何定义cosx 在matlab中如何画方括号 matlab中这个erfc怎么解决公式中在其他数值都已知的情况下如何求出D的数值.最好能提供matalb代码. 【matlab】请问这个问题该如何解决呢? matlab 中lnx 如何表示y上面一个尖角号在matlab中如何表示 matlab中如何解决整数规划问题关于供应链设施选址问题的《容量无限制成本固定模型》,如何用matlab解决 matlab中place函数使用问题The place command cannot place the poles at the specified locations because the resulting eigenvector matrix is nearly singular.这个该如何解决? Matlab中如何求导? matlab中三次样条插值能解决什么问题? 如何Matlab 中在cell中添加元素 【Matlab】Matlab中如何编写S函数