英语翻译After a PUC,MCLK and SMCLK are sourced from DCOCLK at 1.1 MHz (see the device-specific data sheet for parameters) and ACLK is sourced from LFXT1CLK in LF mode with an internal load capacitance of 6pF.

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/03 19:19:00
英语翻译After a PUC,MCLK and SMCLK are sourced from DCOCLK at 1.1 MHz (see the device-specific data sheet for parameters) and ACLK is sourced from LFXT1CLK in LF mode with an internal load capacitance of 6pF.

英语翻译After a PUC,MCLK and SMCLK are sourced from DCOCLK at 1.1 MHz (see the device-specific data sheet for parameters) and ACLK is sourced from LFXT1CLK in LF mode with an internal load capacitance of 6pF.
英语翻译
After a PUC,MCLK and SMCLK are sourced from DCOCLK at 1.1 MHz (see the device-specific data sheet for parameters) and ACLK is sourced from LFXT1CLK in LF mode with an internal load capacitance of 6pF.

英语翻译After a PUC,MCLK and SMCLK are sourced from DCOCLK at 1.1 MHz (see the device-specific data sheet for parameters) and ACLK is sourced from LFXT1CLK in LF mode with an internal load capacitance of 6pF.
非本人专业,故相关背景知识不牢固,翻译不完美.望高手指正!
在上电清除信号发生后,主时钟和子系统时钟将选择DCOCLK作为时钟源震荡频率为1.1兆赫兹(详系参数请见设备具体数据表),同时在LF模式(XTS=0)时,辅助时钟的信号源为LFXT1(接低频振荡器),内部负载电容为6pf.